UHD - Calibration Application Notes

Table of Contents

Self-calibration

The UHD comes with several self-calibration utilities for minimizing IQ imbalance and DC offset. These utilities perform calibration sweeps using transmit leakage into the receive path (special equipment is not required). The results from a calibration are written to a csv file in the user's home directory. UHD will automatically apply corrections at runtime when the user re-tunes the daughterboard LO. Calibration results are specific to an individual RF board.

Note: When a calibration table is present, and the user wishes to override the calibration settings through the API: the user should re-apply the desired setting every time the LO is re-tuned.

UHD comes with the following calibration utilities:

  • uhd_cal_rx_iq_balance: - mimimizes RX IQ imbalance vs LO frequency
  • uhd_cal_tx_dc_offset: - mimimizes TX DC offset vs LO frequency
  • uhd_cal_tx_iq_balance: - mimimizes TX IQ imbalance vs LO frequency

The following RF frontends are supported by the self-calibration utilities:

  • WBX transceiver board
  • SBX transceiver board
  • more to come...

Calibration utilities

UHD installs the calibration utilities into <install-path>/bin. Disconnect any extrernal hardware from the RF antenna ports, and run the following from the command line. Each utility will take several minutes to complete.

uhd_cal_rx_iq_balance --verbose --args=<optional device args>
uhd_cal_tx_iq_balance --verbose --args=<optional device args>
uhd_cal_tx_dc_offset --verbose --args=<optional device args>

See the output given by --help for more advanced options, such as: manually choosing the frequency range and step size for the sweeps.

Calibration data

Calibration files are stored in the user's home/application directory. They can easily be moved from machine to another by copying the "cal" directory. Re-running a calibration utility will replace the existing calibration file. The old calibration file will be renamed so it may be recovered by the user.

  • Unix: ${HOME}/.uhd/cal/
  • Windows: %APPDATA%\.uhd\cal\