Classes
class	dboard_base

struct	dboard_eeprom_t

class	dboard_id_t

class	dboard_iface

struct	dboard_iface_special_props_t
	Special properties that differentiate this daughterboard slot. More...

class	dboard_manager

struct	mboard_eeprom_t

class	mboard_iface

class	multi_usrp

class	rx_dboard_base

struct	subdev_spec_pair_t

class	subdev_spec_t

class	tx_dboard_base

class	xcvr_dboard_base

Typedefs
typedef multi_usrp	single_usrp
	Multi-USRP is a superset of Single-USRP. More...

Functions
UHD_API bool	operator== (const dboard_id_t &lhs, const dboard_id_t &rhs)

UHD_API bool	operator== (const subdev_spec_pair_t &, const subdev_spec_pair_t &)
	overloaded comparison operator for subdev_spec_pair_t More...

Typedef Documentation

◆ single_usrp

Multi-USRP is a superset of Single-USRP.

Possible subdev connection types:

A complex subdevice is physically connected to both channels, which may be connected in one of two ways: IQ or QI (swapped).

A real subdevice is only physically connected one channel, either only the I channel or only the Q channel.

Possible device subdev properties

UHD_API bool uhd::usrp::operator==	(	const subdev_spec_pair_t &	,
		const subdev_spec_pair_t &
	)

overloaded comparison operator for subdev_spec_pair_t

UHD_API bool uhd::usrp::operator==	(	const dboard_id_t &	lhs,
		const dboard_id_t &	rhs
	)

Comparator operator overloaded for dboard ids. The boost::equality_comparable provides the !=.

Parameters

lhs	the dboard id to the left of the operator
rhs	the dboard id to the right of the operator

Enumerations
enum	subdev_conn_t { SUBDEV_CONN_COMPLEX_IQ = 'C', SUBDEV_CONN_COMPLEX_QI = 'c', SUBDEV_CONN_REAL_I = 'R', SUBDEV_CONN_REAL_Q = 'r' }

enum	subdev_prop_t { SUBDEV_PROP_NAME, SUBDEV_PROP_OTHERS, SUBDEV_PROP_SENSOR, SUBDEV_PROP_SENSOR_NAMES, SUBDEV_PROP_GAIN, SUBDEV_PROP_GAIN_RANGE, SUBDEV_PROP_GAIN_NAMES, SUBDEV_PROP_FREQ, SUBDEV_PROP_FREQ_RANGE, SUBDEV_PROP_ANTENNA, SUBDEV_PROP_ANTENNA_NAMES, SUBDEV_PROP_CONNECTION, SUBDEV_PROP_ENABLED, SUBDEV_PROP_USE_LO_OFFSET, SUBDEV_PROP_BANDWIDTH }