#include <uhd/types/serial.hpp>
Public Types | |
typedef boost::shared_ptr< i2c_iface > | sptr |
Public Member Functions | |
virtual | ~i2c_iface (void) |
i2c_iface::sptr | eeprom16 (void) |
Create an i2c_iface than can talk to 16 bit addressable EEPROMS. More... | |
virtual void | write_i2c (boost::uint16_t addr, const byte_vector_t &buf)=0 |
virtual byte_vector_t | read_i2c (boost::uint16_t addr, size_t num_bytes)=0 |
virtual void | write_eeprom (boost::uint16_t addr, boost::uint16_t offset, const byte_vector_t &buf) |
virtual byte_vector_t | read_eeprom (boost::uint16_t addr, boost::uint16_t offset, size_t num_bytes) |
The i2c interface class: Provides i2c and eeprom functionality. A subclass should only have to implement the i2c routines. An eeprom implementation comes for free with the interface.
The eeprom routines are implemented on top of i2c. The built in eeprom implementation only does single byte reads and byte writes over the i2c interface, so it should be portable across multiple eeproms. Override the eeprom routines if this is not acceptable.
typedef boost::shared_ptr<i2c_iface> uhd::i2c_iface::sptr |
|
virtual |
i2c_iface::sptr uhd::i2c_iface::eeprom16 | ( | void | ) |
Create an i2c_iface than can talk to 16 bit addressable EEPROMS.
|
virtual |
Read bytes from an eeprom.
addr | the address |
offset | byte offset |
num_bytes | number of bytes to read |
|
pure virtual |
Read bytes over the i2c.
addr | the address |
num_bytes | number of bytes to read |
|
virtual |
Write bytes to an eeprom.
addr | the address |
offset | byte offset |
buf | the vector of bytes |
|
pure virtual |
Write bytes over the i2c.
addr | the address |
buf | the vector of bytes |