#include <uhd/cal/pwr_cal.hpp>

Inheritance diagram for uhd::usrp::cal::pwr_cal:

Public Types
using	sptr = std::shared_ptr< pwr_cal >

Public Member Functions
virtual void	add_power_table (const std::map< double, double > &gain_power_map, const double min_power, const double max_power, const double freq, const boost::optional< int > temperature=boost::none)=0

virtual void	clear ()=0

virtual void	set_temperature (const int temperature)=0

virtual int	get_temperature () const =0
	Return the current default temperature. More...

virtual void	set_ref_gain (const double gain)=0

virtual double	get_ref_gain () const =0

virtual uhd::meta_range_t	get_power_limits (const double freq, const boost::optional< int > temperature=boost::none) const =0

virtual double	get_power (const double gain, const double freq, const boost::optional< int > temperature=boost::none) const =0

virtual double	get_gain (const double power_dbm, const double freq, const boost::optional< int > temperature=boost::none) const =0

Public Member Functions inherited from uhd::usrp::cal::container
virtual	~container ()=default

virtual std::string	get_name () const =0
	Return the name of this calibration table. More...

virtual std::string	get_serial () const =0
	Return the device serial of this calibration table. More...

virtual uint64_t	get_timestamp () const =0
	Timestamp of acquisition time. More...

virtual std::vector< uint8_t >	serialize ()=0
	Return a serialized version of this container. More...

virtual void	deserialize (const std::vector< uint8_t > &data)=0
	Populate this class from the serialized data. More...

Static Public Member Functions
static sptr	make (const std::string &name, const std::string &serial, const uint64_t timestamp)
	Factory for new cal data sets. More...

static sptr	make ()
	Default factory. More...

Static Public Member Functions inherited from uhd::usrp::cal::container
template<typename container_type >
static std::shared_ptr< container_type >	make (const std::vector< uint8_t > &data)
	Generic factory for cal data from serialized data. More...

Detailed Description

Class that stores power levels (in dBm) at various gains, frequencies, and temperatures.

This container class is suitable for all cases where devices want to store a gain-to-power mapping from a single, overall gain value.

The underlying data structure stores the power level for every gain/frequency point that is part of this data set. It can also do a reverse look-up of gain values for a given power value.

The interpolation algorithms assume a monotonic gain/power profile, i.e., f(gain) = power is monotonically increasing. If the power is not monotonically increasing, the interpolation algorithms still work, but get_gain() might produce a greater than necessary interpolation error. For that case, this class provides get_gain_coerced(), which helps with both coercion of the interpolated gain into a gain value that can be used at the call site, as well as minimizing the effect on the application using this container.

All interpolation algorithms first interpolate temperature by finding the nearest available temperature data. For example, if the data set includes calibration data for 40C and 50C, and the actual temperature is measured at 48C, then the data set for 50C is used, and the data set for 40C is not considered at all. Within a data set, frequency and gain are interpolated in two dimensions (the same is true for frequency and power for get_gain() and get_gain_coerced()) using a bilinear interpolation.

Member Typedef Documentation

◆ sptr

using uhd::usrp::cal::pwr_cal::sptr = std::shared_ptr<pwr_cal>

Member Function Documentation

◆ add_power_table()

virtual void uhd::usrp::cal::pwr_cal::add_power_table	(	const std::map< double, double > &	gain_power_map,
		const double	min_power,
		const double	max_power,
		const double	freq,
		const boost::optional< int >	temperature = `boost::none`
	)

pure virtual

Add or update a power level data point

Note: Power measurements can only be written atomically. It is not possible to add individual gain/power points using this method.

Parameters

gain_power_map	A mapping gain -> power (dB -> dBm) for all measured gain points for this frequency.
min_power	The minimum available power for this frequency.
max_power	The maximum available power for this frequency.
freq	The frequency at which this power level was measured
temperature	The temperature at which this power level was measured, in Celsius. This parameter is optional, the return value for get_temperature() is used if no temperature is provided here.

◆ clear()

virtual void uhd::usrp::cal::pwr_cal::clear ( )

pure virtual

Clear all stored values

Note: All of the getters will throw a uhd::assertion_error if called after clearing the data.

◆ get_gain()

virtual double uhd::usrp::cal::pwr_cal::get_gain	(	const double	power_dbm,
		const double	freq,
		const boost::optional< int >	temperature = `boost::none`
	)		const

pure virtual

Look up a gain value from a power value.

This is the reverse function to get_power(). Like get_power(), it will interpolate in two dimensions (linearly) if the requested power value is not part of the measurement data.

Note: power_dbm is coerced into the available power range using get_power_limits().

Parameters

power_dbm	The power (in dBm) at which we are getting the gain value for
freq	The frequency at which we are finding the gain
temperature	The temperature at which we are finding the gain. If none is given, uses the current default temperature (see set_temperature()).

◆ get_power()

virtual double uhd::usrp::cal::pwr_cal::get_power	(	const double	gain,
		const double	freq,
		const boost::optional< int >	temperature = `boost::none`
	)		const

pure virtual

Returns the power at a gain value.

This will interpolate from the given data set to obtain a power value if gain and frequency are not exactly within the given data set.

Parameters

gain	The gain at which we are checking the power
freq	The frequency at which we are checking the power
temperature	The temperature at which we are checking the power. If none is given, uses the current default temperature (see set_temperature()).

◆ get_power_limits()

virtual uhd::meta_range_t uhd::usrp::cal::pwr_cal::get_power_limits	(	const double	freq,
		const boost::optional< int >	temperature = `boost::none`
	)		const

pure virtual

Return the min and max power available for this frequency

◆ get_ref_gain()

virtual double uhd::usrp::cal::pwr_cal::get_ref_gain ( ) const

pure virtual

Return the current reference gain point.

Currently unused.

◆ get_temperature()

virtual int uhd::usrp::cal::pwr_cal::get_temperature ( ) const

pure virtual

Return the current default temperature.

◆ make() [1/2]

static sptr uhd::usrp::cal::pwr_cal::make ( )

static

Default factory.

◆ make() [2/2]

static sptr uhd::usrp::cal::pwr_cal::make	(	const std::string &	name,
		const std::string &	serial,
		const uint64_t	timestamp
	)

static

Factory for new cal data sets.

◆ set_ref_gain()

virtual void uhd::usrp::cal::pwr_cal::set_ref_gain ( const double gain )

pure virtual

Set the reference gain point, i.e., the gain value where by definition the difference between linearized power and measured power is zero.

Currently unused.

◆ set_temperature()

virtual void uhd::usrp::cal::pwr_cal::set_temperature ( const int temperature )

pure virtual

Set the current default temperature

Some of the API calls have a optional temperature argument. However, in practice, it is often useful to set an ambient temperature once, or only when it has changed, and then use a default temperature instead of providing the temperature on every call. This sets the default temperature.

The documentation for this class was generated from the following file:

include/uhd/cal/pwr_cal.hpp

Public Types

Public Member Functions

Static Public Member Functions

Detailed Description

Member Typedef Documentation

◆ sptr

Member Function Documentation

◆ add_power_table()

◆ clear()

◆ get_gain()

◆ get_power()

◆ get_power_limits()

◆ get_ref_gain()

◆ get_temperature()

◆ make() [1/2]

◆ make() [2/2]

◆ set_ref_gain()

◆ set_temperature()