#include <uhd/rfnoc/registry.hpp>

Public Types
using	factory_t = std::function< noc_block_base::sptr(noc_block_base::make_args_ptr)>

Static Public Member Functions
static void	register_block_direct (noc_id_t noc_id, device_type_t device_id, const std::string &block_name, bool mb_access, const std::string &timebase_clock, const std::string &ctrlport_clock, factory_t factory_fn)

static void	register_block_descriptor (const std::string &block_key, factory_t factory_fn)

Detailed Description

RFNoC Block Registry

A container for various functions to register blocks

Member Typedef Documentation

◆ factory_t

using uhd::rfnoc::registry::factory_t = std::function<noc_block_base::sptr(noc_block_base::make_args_ptr)>

Member Function Documentation

◆ register_block_descriptor()

static void uhd::rfnoc::registry::register_block_descriptor	(	const std::string &	block_key,
		factory_t	factory_fn
	)

static

Register a block that does use a block descriptor file

Use this registry function for blocks that also have a textual description (block descriptor file).

For these blocks, the framework will first look up the Noc-ID from the blocks on the FPGA, and then find the corresponding block key by searching all the availble block descriptor files. When such a key is found, it will be used to find a block that was previously registered here.

◆ register_block_direct()

static void uhd::rfnoc::registry::register_block_direct	(	noc_id_t	noc_id,
		device_type_t	device_id,
		const std::string &	block_name,
		bool	mb_access,
		const std::string &	timebase_clock,
		const std::string &	ctrlport_clock,
		factory_t	factory_fn
	)

static

Register a block that does not use a block descriptor file

Note: It is highly recommended to use the UHD_RFNOC_BLOCK_REGISTER_DIRECT() macro instead of calling this function.

Use this registry function for blocks that do not read from a textual description (block descriptor file).

If the Noc-ID is already registered, it will print an error to stderr and ignore the new block.

Parameters

noc_id	The 32-bit Noc-ID for this block (e.g. 0xDDC00000).
device_id	The 16-bit Device-ID for this block (ANY_DEVICE for device agnostic blocks).
block_name	The name used for the block ID (e.g. "Radio").
mb_access	Set this to true to request full access to the motherboard in the block controller. Radio blocks, for example, require this. If set, UHD may grant access to the underlying motherboard controller to the block. See also uhd::rfnoc::noc_block_base::get_mb_controller().
timebase_clock	The name of the clock that is used for time reference on timed commands. Blocks that derive time from the graph (e.g. DDC, DUC blocks) should set this to uhd::rfnoc::CLOCK_KEY_GRAPH.
ctrlport_clock	The name of the clock that is driving the control port. This is device-dependent. A typical value is `"bus_clk"`.
factory_fn	A factory function that returns a reference to the block.

The documentation for this class was generated from the following file:

registry.hpp