USRP Hardware Driver and USRP Manual  Version: 4.4.0.HEAD-0-g5fac246b
UHD and USRP Manual
uhd::features::spi_periph_config_t Struct Reference

#include <uhd/features/spi_getter_iface.hpp>

Public Attributes

uint8_t periph_cs
 Indicates which GPIO line to use for the CS signal. More...
 
uint8_t periph_sdi
 Indicates which GPIO line to use for the SDI signal. More...
 
uint8_t periph_sdo
 Indicates which GPIO line to use for the SDO signal. More...
 
uint8_t periph_clk
 Indicates which GPIO line to use for the SCLK signal. More...
 

Detailed Description

The SPI peripheral configuration struct: Used to configure the GPIO lines for SPI transactions

Member Data Documentation

◆ periph_clk

uint8_t uhd::features::spi_periph_config_t::periph_clk

Indicates which GPIO line to use for the SCLK signal.

◆ periph_cs

uint8_t uhd::features::spi_periph_config_t::periph_cs

Indicates which GPIO line to use for the CS signal.

◆ periph_sdi

uint8_t uhd::features::spi_periph_config_t::periph_sdi

Indicates which GPIO line to use for the SDI signal.

◆ periph_sdo

uint8_t uhd::features::spi_periph_config_t::periph_sdo

Indicates which GPIO line to use for the SDO signal.


The documentation for this struct was generated from the following file: